“Endless Rush Outdoors is reader supported. We may make a small commission at no extra cost to you should you make a purchase through links from this site.”

Smith Mission MIPS Review – Great Under $150 Ski Helmet

smith mission mips helmet review

Are you looking for a good, full featured, ski helmet but don’t want to break the bank? The Smith Mission MIPS Ski and Snowboard helmet could be the helmet for you. It has most common features such as adjustable venting and removable ear pads. It has MIPS for your safety and anti fog vents for your goggles. Read below to see our detailed Smith Mission MIPS review.

About Smith Optics

Smith Optics was started in 1957 by Dr Bob Smith when he started producing ski goggles in his garage. Along the way, they have been responsible for producing many ski goggle innovations. They produce some of the best ski goggles available today. Smith made their first ski helmet in 2006 so they could build on their great anti-fog ski goggles with the AirEvac anti fog vented helmet.

Smith Mission MIPS Snow Helmet Features

Smith Mission MIPS Ski and Snowboard Helmet

Specifications

  • ASTM F 2040, CE EN 1077, 2007 CLASS B, CPSC, CE EN178 Certified
  • MIPS
  • ABS shell with EPS Foam liner and Koroyd
  • Size adjustment dial
  • 14 air vents – adjustable
  • AirEvac goggle anti fog system
  • Removeable ear pads compatible with bluetooth helmet speakers

MIPS – Multi-directional Impact Protection System – MIPS is a layer in your helmet under the energy absorber that allows the helmet exterior shell to rotate relative to your head. This means that for angled impacts such as a glancing blow, the helmet shell will rotate without forcing your head to rotate. This reduces the forces going into your head and spine reducing your risk of injury. Learn more about MIPS here.

Zonal Koroyd Aerocore construction – Plastic honeycomb energy absorber on the sides of your head. Zonal Koroyd crushes giving it enhanced energy absorption. Unlike EPS foam, it does not rebound and release the energy. It permanently crushes when hit by something. It weighs less than a solid chunk of EPS foam allowing the helmet to weigh less. Learn more about Zonal Koroyd here.

koroyd honeycomb

ASTM 2040F Certified – This helmett is certified to ASTM and CE standards. It is certified to the following list of standards.

Regulator adjustable climate control – this helmet has adjustable venting for maximum comfort. A tab on the back of the helmet allows you to open and close the 14 vents. It has vent positions, open, middle and closed. It does not have independent front and back vents that higher end Smith helmets have.

AirEvac vent system for goggle defog – Vents located in the front of the helmet direct air down into your goggles keeping them from fogging up. They are designed to work with most Smith ski goggles.

airevac goggle anti fog vent

Audio compatible ear pads that are removeable – The ear pads are designed to work with Outdoor Tech audio system blue tooth speakers. They can be inserted into velcro slots in the ear pads. The ear pads can be removed for people like me who get headaches from ear pressure or it’s a warmer day and you don’t need them to keep warm.

removeable ear pads

ABS Shell and EPS foam liner – The construction of the helmet uses an ABS plastic shell with an EPS foam liner. The EPS is replaced with Koroyd plastic honeycomb on the sides of the helmet.

helmet construction

Removeable helmet liner – The mesh and fleece helmet liner is removable for cleaning or more space. It is attached with velcro strips into the helmet.

Goggle Clip – There is a plastic clip on the back of the helmet for attaching your goggle strap. The goggle strap is slid under the clip. There is no snap or bungee to hold the strap from sliding out.

goggle clip

Padded neck strap – the neck strap has a thin layer of padding wrapped around it. There is plenty of length to adjust.

Dfs2 adjustable fit system – This helmet has an adjustable dial fit giving you a great fit and instant comfort when you put on the helmet.

size adjustment dial

Appearance – The helmet has a clean appearance with a few character lines molded in to give it a little styling. It does not have any visor feature such as the Smith Vantage and Smith Level helmets have. It has more shape than some of the lower end Smith Helmets.

Cost – This helmet currently retails for $140 for the MIPS version and $110 for the regular version. I would always buy the MIPS version for the extra $30. You can find last years model (slightly different colors) for close to $100 if you shop around. This puts it a little more expensive then their $80-$100 Scout model. It is far below their $270 Vantage MIPS model.

See our comparison between Smith and OutdoorMaster to see how this helmet measures up to the less expensive OutdoorMaster helmet.

How does it fit, feel and perform?

Sizing and feel

The helmet is available in 4 sizes. Small, Medium, Large, and X-Large. My head measures 23.5 inches or 59.7cm. A size large helmet has a size range from 59-63cm. I fall just inside the low end of a large.

The helmet size chart seems accurate. I fit the large okay. I’m using just a few clicks on the size adjuster.

My head fits comfortably in the helmet. It does feel snug around the sides and top. I am able to wear the helmet with my favorite under helmet hat, the OutdoorResearch Peruvian. The ear pads feel tight but don’t feel like they are crushing my ear. I typically get a headache on my left side from the earpad pushing my left ear into my head. It goes away by removing the earpads and just using a hat. I’m hoping this helmet will break the trend.

outdoor research peruvian hat

The chin strap has plenty of extra strap. With a hat and neckwarmer on I have about an inch and a half of spare strap. The chin strap padding is thin. I would prefer a bit thicker padding there.

Ski goggle compatibility

This helmet works very well with Smith I/O Mag goggles and other Smith goggle designs. It has minimal to no goggle gap. The goggle outboard edges fit nicely into the helmet. The strap doesn’t cover any vents. The helmet also works well with OutdoorMaster goggles and other brands. See the image below for how the helmet looks with a set of Smith I/O Mag snow goggles.

Every Smith helmet I have worn with Smith goggles has done a really good job of keeping the goggles fog free. I have no doubts this one will work just as good.

smith i/o goggles side view
smith i/o goggles front view
smith i/o goggles iso view

Ear Pad removeal

The ear pads come off but it does take some effort. You must unclip the size adjuster from the left and right side and slide it out of the ear pads. Be careful during this step. I broke a similar size adjuster on a Smith helmet a few years back taking the ear pads off. Then you have to pull the ear pads out of each side. The ear pads have a nice comfortable feel.

Helmet Safety

Nobody wants to hit a tree while skiing but stuff happens. This helmet has all the latest safety innovations including MIPS system and Koroyd energy absorber.

It goes above and beyond with several safety certifications above the standard ASTM 2040F. I have taken one hard glancing blow off a tree while mounting biking with a MIPS equipped helmet. I flew into the tree with my shoulder and hit the ground. Just about every part of me hurt except my head. That was the most terrifying biking or skiing moment I’ve ever had. I’m a believer in MIPS liner technology after that. I do like glade skiing quite a bit so I ski around trees just as much as I bike.

Overall construction

The goggle clip – The plastic goggle clip works. Not much more can be said about it. I would prefer a snap or bungee that positively holds the goggles to your helmet. I’m concerned that this plastic clip will wear out and snap off with time. Smith I/O Mag goggles are very difficult to swap the lens while wearing. If you swap lenses frequently you’ll be bending this plastic clip a lot. The clip opens downward. If your goggles are hanging off the back of your helmet, it’s possible they can slide down out of the clip.

Size adjuster – The size adjuster on this helmet works. It feels a bit cheap and not smooth to operate. Helmets costing 1/3rd as much as this helmet come with better, smoother feeling sized adjusters.

Helmet liner – The liner is removeable but not too many times. The velcro on the liner has a tendency to pull the glued on velcro pads off the helmet instead of freeing the velcro connection. A better adhesive needs to be used to attach the velcro pads to the EPS foam.

Shell, liner, and padding – The shell construction looks very clean. The helmet straps are attached inside the EPS liner so there is no exposed rivets or other fasteners on the outside of the helmet. The moldings look well done without any flash or other blemishes.

Regulator climate control adjustable vent – The vent feels smooth when you operate it. I can operate it with the helmet on my head. I can get it with a glove on when I can find feel the knob. The sliding knob has a detent for mid position when you want the vent half open. There are enough vents on this helmet to provide good ventilation into your head on warm spring days.

Anti-Fog

I have had nothing but good experience with the Smith goggle and helmet combination. This has a similar setup to most other Smith helmets that have worked very well. I expect the venting to work really well at keeping the goggles from fogging up as long as you keep moving and keep the air flowing.

See our guide to the best anti-fog ski goggles for great performing goggles including the Smith I/O Mag.

Smith Mission MIPS Ski and Snowboard Helmet Summary

Smith Mission MIPS Snow Helmet

The Smith I/O Mag snow goggles are a great performing set of ski and snowboard goggles. They have excellent lens quality and an improved lens swap system. They make a great companion to this helmet and are compatible with the helmet anti fog vents. See my review of the Smith I/O Mag Ski Goggles here.


What We Liked
✔️ MIPS and Koroyd Safety Features
✔️ Good fit. Plenty of adjustment in the size adjuster and chin strap
✔️ Goggle Anti Fog vents
✔️ Stylish appearance
✔️ 3 position adjustable vents
✔️ Comfortable to wear
What We Didn’t Like
Size adjustment dial feels cheap
Ear pads are difficult to remove
Velcro pads are coming unglued off helmet EPS foam on my first try to remove the mesh liner.
Plastic goggle clip

Overall Impression

The Smith Mission MIPS helmet would be a great choice for most skiers. It has all the features you need at a reasonable cost. A Smith Vantage MIPS will give you a few more features such as split front and rear vents but at more than twice the cost. For most skiers the Smith Mission helmet will be a welcome addition to their ski or snowboard gear.

You might also like:

selfie for info block

About the author

My name is Doug Ryan. I am an outdoors enthusiast always looking forward to my next adventure. I spend as much time skiing, biking, and paddleboarding as I can. I decided to start Endless Rush Outdoors as a way to share my knowledge and enthusiasm for all things outdoor adventures and to help other people have as much fun as me.

Recent Ski and Snowboard Articles

Leave a Comment